AquaPRO WaterPro, Руководство по обслуживанию

Страница: 12 / 40

Master Programming Mode
When the Master Programming Mode is entered, parameters can be set to make the timer function as needed.
NOTE: Depending on current option settings, some displays cannot be viewed or set.
Entering Master Programming Mode:
1. Press and hold the Shift and Up buttons for 5 seconds.
OR
2. Set the time of day display to 12:01 PM or 12:01HR (See the User Programming section to
learn how to set the Time of Day). Then go to the main display screen, press the Up and Down
buttons at the same time for 5 seconds.
Exiting Master Programming Mode:
1. Press the Extra Cycle button once per display until all are viewed. Master Programming Mode is
exited and the normal display screen appears.
2. To exit the Master Programming Mode without saving, press the Diagnostic button.
NOTE: If no keypad activity is made for 5 minutes while in the Master Programming Mode, or if
there is a power failure, no changes will be made, and the unit will go back to the main display
screen.
Resets:
Soft Reset: Press and hold the Up and Down buttons for 25 seconds until 12:00PM (or 12:00HR)
appears. This resets all parameters except for the
flow meter totalizer volume.
Master Reset: Hold the Shift button while powering up the unit. This resets all of the
parameters in the unit. Check and verify the choices selected in Master Programming Mode.
1. System Type
This program step selects the system type.
— Press the Up or Down buttons to adjust this value.
— Press the Extra Cycle button.
2. Valve Type
This program step selects the valve type.
— Press the Up or Down buttons to adjust this value.
— Press the Extra Cycle button.
CAUTION: Before entering Master Programming, please contact your local professional water dealer.
Page 12