Aquametro Oil & Marine CONTOIL VZF II, Монтаж и эксплуатация

Страница: 27 / 48

27
6 Maintenance and Repair
6.1 Calibration
Alle unsere Durchflussmengenzähler werden werkseitig kalibriert.
All our flow meters are calibrated in the factory. An accuracy check and recalibration is offered at
Aquametro Oil & Marine, this is usually dependent on customer, operator or regulation
requirements. This interval depends largly on the operating conditins, process liquid and the
application the flow meter is installed in.
6.2 Service maintenance
CAUTION
The surfaces of the device/system and the medium may be hot.
Risk of burns!
Carry out work only on cooled devices/systems.
Work may only be performed by authorized specialists in accordance with the
applicable regulations.
Use appropriate protective equipment.
WARNING
The device/system may be under pressure.
Risk of severe injury!
Carry out work only on non-pressurized systems.
When working on the device/system watch out for leaking medium.
Work may only be performed by authorized specialists in accordance with the
applicable regulations.
Use appropriate protective equipment, particularly safety goggles.
NOTICE
Use of unsuitable cleaning agents and precedures.
Risk of malfunction or damage!
Follow the cleaning instructions on the next page.
NOTICE
Warranty will be void, if the flow meter is being opened during the warranty
period by a non Aquametro Oil & Marine certified person.