Aquametro Oil & Marine CONTOIL VZF II, Монтаж и эксплуатация

Страница: 25 / 48

25
Used rng Range where the counter been used in hours (h)
0 Total hours of operation (h)
1 hours of operation in preferred range (Qmin – Qcont)
2 hour of operation in upper flow range (Qcont – Qmax)
3 hours of operation above Qmax (h)
4 duration since last recorded flow (h)
5 maximum registered flow rate since start of operation
U Code* select to enable / disable access with user code
FW 4.xx.xx Firmware version
CS yyyy Check Sum value (hexadecimal 4 digits)
Serial nr* Serial number
Defaults* select to save / load customer settings and reset to firmware defaults
Save Cust* select to save customer settings
Load Cust* select to load saved customer settings
FW def* select to reset the device to firmware defaults
Piston additional piston rotation timing information for service technicians
*edit access for service technicians only