USER MANUAL – aquama
®
compact Atomizer
10
PART 4
CLEANING, DISMANTLING AND
MAINTENANCE
The disinfectant liquid may leave residues in the gun after use. It is imperative to rinse the gun after each use to
avoid premature wear.
To clean the inside of the gun, fill the tank with clean water and operate the gun for 5-10 seconds. Then drain the
excess water from the tank before storing the gun.
For disassembly, the hose must be depressurized. Turn off the PURE compressor and squeeze the trigger on the
gun
=
until the air is completely exhausted before disconnecting the hose.
4.1 CHECK LIST
1. After each use, check that the system is free of air.
2. Check that the gun screws are always still tight.
3. Make sure there is always enough disinfectant liquid in the tank
4. Check that the screws on the cart are tight.
