Aqualisa Visage Скачать руководство пользователя страница 5

Visage™ Digital Installation Guide  5

Declaration of Conformity

Aqualisa Products Limited declares that the 

Quartz Smart Valve™ and supplied controller, 

in conjunction with pairing remotes, complies 

with the essential requirements and other 

relevant provisions of the Low Voltage 

Directive (2014/35/EU), and the EMC Directive 

(2014/30/EU). 

After installation

Familiarise the end user with the operation 

VISAGE™ DIGITAL INSTALLATION

This product must be installed by a competent person in accordance with the relevant 
Water Supply Regulations.
Prior to installation, ensure all additional guides supplied with this product are read and 
understood.
In addition to the guide below, it is essential that the important information (above) 
is read and understood and that you have all the necessary components before 
commencing installation.
The Visage™ Digital shower system is supplied with universal fixings intended to secure it 
to a suitable wall.

Although the Quartz Smart Valve™ complies with all relevant EMC standards, if incorrectly 
sited, it may interfere with digital TV reception. Please follow the recommendations below to 
minimise this effect.
See recommended layouts below. 
Images of Quartz Smart Valve™ for illustration only, refer to instruction 1 for orientation.

• Route cables separately, and as far apart from each other as possible.
• Aerial to point away from the Quartz Smart Valve™.
• Ensure the distance between the Quartz Smart Valve™ and the aerial is as large as possible.

LAYOUT WHICH COULD CAUSE PROBLEMS

LOWEST PROBABILITY OF INTERFERENCE

Digital TV Interference

AERIAL

LARGEST POSSIBLE DISTANCE

DATA 

CABLE

POWER 

CABLE

CABLE 

TO  TV

HIGH PROBABILITY 

OF INTERFERENCE, 

BOTH RADIATED 

AND CONDUCTED

POWER 

CABLE

CABLE 

TO  TV

DATA 

CABLE

AERIAL

SHORT DISTANCE

Installation videos are available on our website www.aqualisa.co.uk/installation-videos  
or alternatively, scan the QR code on the reverse of this guide. 

IMPORTANT INFORMATION

of this product and hand them all literature. 

Complete and post the guarantee card or 

register online at www.aqualisa.co.uk

Guarantee

Aqualisa products are supplied complete with 

a 1 year parts and labour guarantee that can 

be upgraded by registering the product with 

Aqualisa. See www.aqualisa.co.uk/guarantee  

for details.

Содержание Visage



























Отзывы: