Aqualisa Visage, Руководство по установке

Страница: 23 / 26

Visage™ Digital Installation Guide 23
USER GUIDE - ADJUSTABLE HEAD
Removing the shower head: With the hose still attached, disengage the pivot clip by pushing
in the outer grey button located on the front of the shower head (near to the hose
connection). Remove the threaded spigot from the bottom of the handset by using the
hose to pull clear. To reattach: Ensure the hose washer is in the correct position, tighten the
threaded spigot into the hose using a suitable hexagonal key, taking care not to over-tighten.
Reinsert the spigot into the handset and engage the pivot clip prior to placing the handset
into the handset holder.
1
To select the preferred height for the shower head, press the button to allow the handset
holder to move up or down the rail.
2
Angular adjustment is made by carefully but firmly pulling
forwards or pushing back the shower head against the
knuckle ratchet in the holder.
3
CARING FOR YOUR SHOWER
Over time, your shower may be affected by hard water scaling. To keep your shower working
effectively, we recommend that you clean your shower regularly.
Your product should be cleaned using only a soft cloth and washing up liquid.
Cleaning the shower head
To reduce the need for chemical descaling in hard water areas, your shower head incorporates a ‘clear
flow’ system, whereby any scale build up can be broken down by gently rubbing the flexible tips of the
jets during use. This procedure should be completed regularly, as often as once a week in some hard
water areas, as scale build up can affect the spray pattern and cause the shower to perform poorly.
Failure to descale the shower head can affect the internal seals and may affect the warranty. Should
descaling of the head using a cleaning agent become necessary, remove the shower head fully and
immerse in a mild proprietary descaler (e.g. vegetable based or plain white vinegar). Cleaning and
maintenance should not be undertaken by children without supervision by a person responsible for
their safety.
DO NOT USE ABRASIVE CLEANERS. It is imperative that descaling is carried out in
accordance with the manufacturer’s instructions, substances that are not suitable for
plastics and electroplated surfaces must not be used.
Cleaning tip: To keep your shower effortlessly clean, we recommend drying all shower
components with a soft cloth after use.
Changing water system?
If switching from a gravity-fed water system to a mains pressure system (e.g. Combination boiler) you
will need to change your Quartz Smart Valve™. Contact a member of our Customer Service team for
further information.