CARE AND MAINTENANCE
14
aquaglide.com | © 2017 Aquaglide
While your product has been initially treated with UV protectant, long-term
exposure to sunlight will damage the product. Regularly apply a UV protectant
to the exposed surface of the tube to ensure the life of your product. We
recommend using ONLY INDIKON POLY GUARD UV for this purpose.
Seasonal application while the product is in use is required.
NOT DOING THIS
WILL VOID THE WARRANTY.
POLY GUARD UV Protectant is available at
most watersports dealers, or online at http://www.aquaglide.com
WARNING:
Certain products, especially petroleum-based solvents,
cleaners and protectants such as ArmorAll can damage the product and
use of these products will void the warranty.
WARNING:
Use of a high-pressure washer will damage the product and
void the warranty. To clean, use a soft bristle brush with mild soap and
fresh water. INDIKON MAXI CLEAN PVC can be used to thoroughly clean
the product prior to storage.
Storing Your Product:
1) Before storing, place the product on a clean, level area. Clean with mild
soap and water and allow to dry completely. Apply POLY GUARD UV to
the surface of the tube before deflating.
2) Remove ALL of the air from the tube using the deflation end of the high
output inflator/deflator. Fold in thirds lengthwise and flat-roll toward the
valves, which should be left in the open position to allow air to escape.
3) Store the product in a clean, dry location. It is best to store inside a
container with moth balls to prevent damage from rodents. NEVER
store uncovered, in a damp location, or on a concrete surface! NEVER
store at temperatures below 40 degrees F.
