ROCKIT JR
VARIO-LOCK
11
aquaglide.com | © 2017 Aquaglide
1) Your product may or may not
come with the Vario-Lock cinch
straps already connected to all
the appropriate D-rings. If they
are not pre-installed please follow
steps 2-3 to properly secure them
to the appropriate D-ring.
2) Run loop end of Vario-Lock
cinch strap through D-ring on
product (Fig. 1)
3) Take tag end of Vario-Lock
cinch strap and thread through
loop (Fig. 2)
4) Run tag end of Vario-Lock cinch
strap through D-ring on other
product to be attached (Fig. 3)
5) Run tag end through cam and
tighten until the two products are
securely connected (Fig. 3)
6) Run tag end through cam and
tighten until the two products are
securely connected (Fig. 3)
*To undo Vario-Lock cinch strap,
simply press cam buckle and pull
strap through backside of cam.
How to connect your Aquaglide Products using
the Vario-Lock cinch strap (when applicable)
Fig 1: Running loop of Vario-Lock cinch
strap through D-ring
Fig 2: Working tag end through loop.
It should look like this once tag end is
through the loop
Fig 3: Running tag end through D-ring
and back through cam to cinch tight
