Aquagarden 2250-4500, Руководство пользователя

Страница: 13 / 44

CONTROLLER FUNCTION
11
Function flow charts:
Scrolling text
(20seconds)
JAMMED, CLEAN
IMPELLER,
CLEAN ROTOR.
Pump will
attempt to
run for 5
seconds
On the sixth
attempt, if the
issue has not been
solved, the pump
will stop until the
issue has been
solved and the
power reset. New
message displayed:
JAMMED, CLEAN
IMPELLER,
CLEAN ROTOR,
RESET POWER.
This step will be
attempted five times
Scrolling text
(10seconds)
LOW WATER,
ADD WATER.
Once water
has been
added (and
the power has
been reset
if it is after
the seventh
attempt),
the pump
will return to
normal function
Once impeller
has been
cleaned, or in
the process of
attempting to
run the pump
has cleared
the blockage,
the pump
will return
to normal
function
Pump will
attempt to
run for 5
seconds
On the sixth
attempt, if water has
not been added,
the pump will stop
until the issue has
been solved and
the power reset.
New message
displayed:
LOW WATER, ADD
WATER, RESET
POWER.
This step will be
attempted five times
IMPORTANT: when the power is being reset, turn the pump off at the mains power supply for a
minimum of 5 seconds – this will allow the components of the controller to fully reset.
EN