Aquagarden 2250-4500, Руководство пользователя

Страница: 9 / 44

INSTALLATION
7
External Running Kit
IMPORTANT: Ensure the O-rings are in place on the hose tails before turning on.
Tip: if the pump is installed in-line it would be suggested to install an inline tap/valve
on both the inlet to and the outlet from the pump. These can then be shut off during
maintenance, preventing the water from the pond and filter draining out when the
pump is removed for maintenance.
Part Number Part Description
1 Stepped hose tail
2 Hose tail lock nut
3 Hose tail O-ring
4 Foot plate
5 Rubber feet
6 Screws & wall plugs
7 Pre-filter cage
To fully release the pump from the cage
to enable you to use the pump in an
external setting, it is necessary to
unscrew the handle section on the rear
section of the cage (part 9). When
used with the External Running Kit, the
pump can be located on the foot plate
in one of three directions.
Included in the kit are:
Pre-filter cage for use in
reservoir (image on page 6).
Hose tail for external in-line
use (image on page 6).
2
1
6
7
4
3
5
External Resevoir Fittings
Three Foot Position Options
External In-line Fittings
EN