Aquafine optima hx series, Инструкция по установке и эксплуатации

Страница: 5 / 46

5
Unit Description:
Fig. A HX S
ERIES
U
NIT
I
DENTIFIED
E
LEMENTS
Elements to identify the HX Series Unit are:
See Fig. A above.
1. Treatment Chamber
2. Sample Port
- optional
3. Gasket Endplate
4. Control Cabinet
5. Quartz Sleeves and Lamps –
located inside the treatment chamber
6. Drain Port
7. Socket Covers
Treatment Chamber:
The UV Treatment Chamber is compiled of a 316L stainless steel cylinder. O-
rings , or gasket endplates are located on both ends (except A & B style units),
which contain the stainless steel nipples and lamp socket retainer assemblies.
Sample Ports:
Two optional sample ports are available for obtaining water samples pre and post
the UV treatment chamber. Sanitary sampling valves should be installed on the
ports.
Gasket Endplate:
Treatment chambers greater than 4” inches in
diameter are provided with 2 removal endplate
assemblies. The endplates are installed with
sealing gaskets/O-rings, located between the
socket cover and the endplate.
See Fig. B
Drain Port
:
Each treatment chamber is provided with Fig. B G
ASKET
E
NDPLATE
a drain port to complete drainage of the
treatment chamber. A drain valve should be installed on the port.
2
4
3 5
1
6 7