2
3
GB
Safety
1. Read carefully before usage.
2. The Skim 600 and 2000 are is only suitable for indoor use.
3. Ensure voltage shown on the label match to the mains supply voltage.
4. Ensure that water cannot reach the socket.
5. Never let the pump run dry, keep it submerged at all times.
6. Disconnect skimmer from mains before any maintenance on your aquarium.
7. If the cables of pump or controller is damaged, do not use the skimmer, recycle the damaged
item and order a new pump or controller at your dealer.
8. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety. Special care should be taken
with the use of electrical equipment by or near children.
Installation Skim 600/2000
1. Check if the perforated plate is positioned correctly towards the pump (see illustration).
2. Connect the air venturi (9) to the air silencer (4) by using the supplied air hose.
3. Place the skimmer inside your sump put the water level adjusting knob at maximum (10).
4. Now connect the skimmer ballast to the power outlet.
5. Adjust the pump power by using the controller (15) and adjust the water level with the adjusting knob (10).
6. Be careful using the skimmer just after you have filled your tank with freshly mixed salt as this can cause
extreme foaming and overflow.
7. The controller has to installed in a dry place, the controller is not water proof (damage due to water damage
is no warranty!) and fixed on the wall or cabinet with a screw!
Options
For easy maintenance you can connect the waste hose with valve (as included in the box) to the collection cup,
remove the rubber cap under the collection cup and connect hose for easy cleaning or external collection into a
bucket.
Maintenance
1. To operate efficiently, the Blue Marine skimmer must be 24 hours a day in use
2. Check daily if your skimmer is functioning properly and produces the desired foam
3. Check daily if the collection cup is full and clean it completely when needed.
4. Check and clean pump regularly to ensure it does not become clogged, dirty pumps may break down, not
maintained pumps are not covered by warranty.
5. Check the bubblecatcher for dirt regulary and clean if needed.
Drip
loop
1. Deckel des Auffangbehälters
2. Auffangbehälter
3. Schraube zur Demontage des Schalldämpfers
4. Schalldämpfer
5. Seal
6. Luftschlauch
7. Luftverteilerplatte
8. Riegel um Luftverteilerplatte an Pumpe
zu befestigen
9. Venturidüse
10. Einstellschraube Wasserstand
11. Wasserauslass
12. Nylonschrauben um Bodenplatte
zu befestigen
13. Die korrekte Pumpenposition
14. Bodenplatte
15. Pumpencontroller
16. Pumpe
17. Adapter
1. Couvercle collecteur
2. Collecteur
3. Vis du silencieux
4. Silencieux principal
5. Joint
6. Tuyau air
7. Plaque de dispersion
8. Ecrou de raccordement plaque/pompe
9. Venturi
10. Manette de réglage niveau d’eau
11. Sortie d’eau
12. Vis nylon pour base
13. Positionnement correct de la pompe
14. Bouchon caoutchouc
15. Contrôleur de pompe
16. Pumpe
17. Transformateur
1. Deksel opvangbeker
2. Opvang beker
3. Schroef voor demontage geluidsdemper
4. Geluidsdemper
5. Afdichtring
6. Luchtslang
7. Luchtverdeelplaat
8. Bout om luchtverdeelplaat aan de
pomp te bevestigen
9. Luchtventuri
10. Water niveau instelknop
11. Wateruitlaat
12. Nylon schroeven voor vastzetten
van de bodemplaat
13. De correcte pomppositie
14. Bodemplaat
15. Pomp controller
16. Pomp
17. Adapter
