background image

3

INTRODUCTION

Thank you for purchasing the AquaCraft

 Miss Vegas

Deuce! We want the time you spend with your new R/C boat 
to be fun and successful, so please fully read the manual. If 
for any reason you think this R/C model is not for you, return 
it to your local hobby dealer immediately. Your hobby dealer 
cannot accept returns on any model after final assembly or 
after your boat has been operated.

SAFETY PRECAUTIONS

•  Never, ever, attempt to swim after a stalled R/C boat. 

Do not get in the water for any reason to retrieve your 
boat. To aid you in retrieving a stalled R/C boat, set up a 
fi shing reel with a tennis ball tied to the end of the line. 
Or better yet, get yourself a small boat so you can row 
out and pick up your R/C boat. Remember to use a PFD 
any time you enter your retrieval craft.

•  AquaCraft products are to be used by ages 14 and over. 
•  Do not touch the propeller anytime the motor is spinning. 

Pay equally close attention to items such as loose clothing, 
shirtsleeves, ties, scarves, long hair or anything that may 
become entangled in the spinning prop. If your fingers, 
hands, etc. come in contact with the spinning propeller, you 
may be severely injured.

•  The speed and mass of this boat can inflict property damage 

and severe personal injury if a collision occurs. Never run this 
boat in the presence of swimmers or where the possibility of 
collision with people or property exists.

•  This boat is controlled by radio signals, which are susceptible 

to possible interference.

•  If your Miss Vegas Deuce should happen to stall, water 

currents will slowly carry it to shore. The bad news is that 
the boat could be carried to the opposite shore. When 
surveying areas to run your model, keep variables in 
mind such as wind direction, size of the lake, etc. It is not 
advisable to run R/C boats on any free-flowing bodies of 
water such as creeks or rivers.

MANUAL SPECIFICATION AND 

DESCRIPTION CHANGES

All pictures, descriptions, and specifi cations found in this 
instruction manual are subject to change without notice. 
AquaCraft maintains no responsibility for inadvertent errors 
in this manual.

ITEMS NEEDED TO COMPLETE

YOUR MISS VEGAS DEUCE

•  HCAP2520 Hot Shot

 2 Glow starter

•  ODOP3130 30% Nitromethane model boat fuel (1 quart)
•  DTXP0125 Kwik-Pit

 250 fuel bottle

•  8 “AA” batteries (FUGP7316 – 16 pack)

OPTIONAL ITEMS

It is a good idea to assemble a useful collection of tools and 
accessories to bring along anytime you head out to the pond. 
Here are some items you will want to keep handy.

•  #2 Phillips screwdriver (HCAR1024)
•  Hobbico

®

 heavy-duty diagonal cutter 7" (HCAR0627)

•  Metric and standard hex drivers 
•  Adjustable wrench
•  Needle-nose pliers (HCAR0625)
•  After Run engine oil (HCAP3000)
•  Glow plugs
•  Fuel tubing (GPMQ4131)
•  Hook & loop material (GPMQ4480)
•  Hobby knife (HCAR0109)
•   AquaCraft Speed Grease

 cable lubricant (AQUB9500) or 

Marine-grade grease (for lubricating the fl exible drive cable) 

•  Zip-ties
•  Extra “AA” batteries
•  Thread-locking compound
•  CA glue and debonder

BELT STARTING SYSTEM

If you would like to update your Miss Vegas Deuce Super 
Tigre

®

 engine to belt start, here is a list of the components 

you will need:

•  SUPG2052 – SuperTigre

®

 Standard Back Plate .18 Marine

•  AQUB9531 – AquaCraft

 17" Starting Belt

•  HCAP3200 – Hobbico TorqMaster

 90 Deluxe 12V Starter

•  HCAP0800 – Hobbico TorqMaster LC 12V 7Amp Battery

OTHER USEFUL ITEMS

TO HAVE ON HAND

•  Paper towels
•  Spray-on glass cleaner
•  Sunglasses
•  Sun block
•  Waders or rubber boots
•  Cooler with plenty of ice and soda
•  Folding table 
•  Lawn chairs
•  First-aid kit
•  EZ-up or canopy for shelter

Содержание Miss Vegas Deuce

















Отзывы: