background image

15

GrimRacer

 Speed Grease

 Cable Lube

This waterproof blue lubricant — with specially formulated, 
“non sling” properties — reduces friction and wear on the 
cable and direct drive systems in electric and nitro boats. 

AQUB9500

The kit form of this Mike “Grimracer” Zaborowski design took the fi rst of its 10 titles at the 2000 IMPBA Internats. Now, you can 
enjoy the same title-taking performance (and top-drawer construction features) in an ARR. The built-up wood sponsons and 
wood-over-foam center hull section are both warp-resistant, and fi nished in a high-gloss clearcoat. GrimRacer performance 
hardware (from stainless steel pull-pull cables to the cowl thumbscrews) is evident throughout, and the fuel tank (which 
holds 8 fl . oz.) was “Grim” designed specifi cally for .21 tunnel hulls. Wanna make racing against you a “grim” prospect for 
your competitors? Then get yours now! 

AQUB0006

Assemble a competition-class wood 

tunnel hull in just 6-8 hours!

Hull Length:

 28 in (711 mm)

Beam:

 11 in (280 mm)

Height:

 5.25 in (130 mm)

Ready-to-Run Weight:

 4 lb (1814 g)

Requires:

  2+ channel radio with one high-torque 

standard servo and one mini servo, 
.21 cu in (3.5 cc) outboard engine

GrimRacer

 Pro Radio Box Tape

Like champion racer Michael “Grimracer” 
Zaborowski, use this 3/4" wide, clear 
electrical 3M tape to seal your boat’s 
radio box water-tight. 

AQUB9514

Содержание Miss Vegas Deuce

















Отзывы: