Cut out A1 by cutting along the lines.
Cut along the line marked .
Using the photo as a guide, apply pressure with the palm of your hand,
gradually curling the paper in the direction of the arrow.
The parts will be easier to assemble if curled.
Attach the triangular glue tabs so that the front side becomes convex.
Add a slight curl to A1 when attaching it.
Using the photo as a guide, attach in the direction of the arrow.
A1
A1
Scissors line
Triangular glue tab
Glue spot
Cut a slot right in
to the apex of
the triangular glue tab.
Glue down the glue
tabs one at a time
in turn.
Parts No.
Parts name
A1
First, glue together
the glue spots
indicated by the
red triangles.
Glue together the remaining
glue spots.
A1
Assemble the head
Use patterns: Page2 / Page3.
A
Scissors
Paste, or woodwork glue
Stencil pen, or bodkin
Ruler
Tools
Scissors line
Mountain fold
Valley fold
Glue spot
A1, B1
Parts No.
Notation Key
The Assembly instructions are divided into five blocks:
A (head), B (body), C (legs), D (arms), and E (Items).
Follow the instructions for each block to assemble your teddy bear.
<Caution>
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
marks a basic assembly technique that remains the same
regardless of the part. Instructions are printed only for the
first instance.
Page
1
Amerigo Teddy Bear : Assembly Instructions
Canon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
