Aquacal SunPower SP05, Руководство по установке

Страница: 50 / 108

Page - 46
1.6.i Configuring Groups
A group is used to control multiple devices (equipment) connected to the heat pump, either by manually
activating the group through a shortcut, or scheduling the group to activate at a specified time.
EXAMPLES IN THIS SECTION:
i.1 Create a Group 46
i.2 Edit a Group 48
i.3 Delete a Group 49
i.1 Create a Group
EXAMPLES OF GROUPS THAT CAN BE CREATED:
o Backyard Lights Group
o
A pool light and a spa light that have been connected and configured by the heat pump installer
can be activated upon demand.
o Cold Plunge Group -
o A spa can be set to "COOL" to a desired temperature upon demand.
o Custom Group -
o
A custom group can be created that heats the water to a desired temperature without effecting
another user's settings.
The example below shows a "BACKYARD LIGHTS" group being created manually.
Two devices will be set to an operating state of "ON" when the group is active.
l
A pool light relay
l
A spa light relay
IF UNIT IS ASLEEP,
SWIPE TO WAKE UP
A
PRESS "MENU"
BUTTON
B
USE ARROWS TO
"GROUPS"
C
PRESS "ENTER"
1
USE ARROWS TO
"NEW GROUP SETUP"
2
ENTER TO CREATE
3
USE ARROWS TO NAME
"BACKYARD LIGHTS"
4
ENTER TO SAVE
5
USE ARROWS TO SET
MAXIMUM ACTIVE TIME
1
-
Ins
ta
ll
at
ion