Aquacal SunPower SP05, Руководство по установке, Страница: 45 / 108

Page - 41
Pool Only, No Valves, Single Speed
This preset configures the heat pump as
follows:
l
No valve actuators are configured.
l
A single speed circulation pump is
configured to use the relay "A" connection
point on the expansion board.
l
A pool schedule is configured (Everyday
from 8:00 am to 6:00 pm)
When pressed, the "Pool/Spa" button will display with two choices.
1. Pool - With an initial timer set for 48 hours at 85° F.
2. Schedules
Spa Only, No Valves, No Pump
This preset configures the heat pump as
follows:
l
No valve actuators are configured.
l
No circulation pump is configured.
l
No schedules are configured.
When pressed, the "Pool/Spa" button will display with two choices:
1. Spa - With an initial timer of 2 hours at 96° F ( 104° F with an installed OTA kit ).
2. Schedules
Spa Only, No Valves, Pentair VS
This preset configures the heat pump as
follows:
l
No valve actuators are configured.
l
A Pentair (or Sta-Rite) variable speed
circulation pump is configured.
l
A pool schedule is configured (Everyday
from 8:00 am to 6:00 pm)
When pressed, the "Pool/Spa" button will display with two choices.
1. Spa - With an initial timer of 2 hours at 96° F ( 104° F with an installed OTA kit ).
2. Schedules
1
-
Ins
ta
lla
tion