8
VEHICLE
How to Charge the Vehicle
1. The vehicle needs to be charged fully
before every use.
Connect the two wall plug wires into the
charger. Then connect the chargers to a
wall plug.
2. Connect the charger wires into the
connector of the charger cable as shown at
right.
3. Remove the pigtail from the Sub Conn
connector. Insert the charger cable into the
Sub Conn connector on the vehicle. A red
light on the charger indicates the vehicle is
charging. A green light indicates the vehicle
is fully charged. A full charge takes
approximately 8 hours.
4. When finished charging, disconnect the
charger and reinsert the pigtail. Whenever
the vehicle is disconnected from the
charger or its tether, the pigtail should be
inserted to protect the connector.
Please note
: Do not leave the charger
connected to the vehicle while unplugged
from the wall - this can cause battery
damage.
Wall plug
Charger
Charger cable
Pigtail
