10
VEHICLE
SETTING UP THE ENDURA
1.
Ensure your vehicle is not connected
to the topside box or charger. Inspect
and Clean SubConn connector. The
SubConn connector needs to be
treated with proper care – please
follow the instructions from the
manufacturer, which are included in
Appendix A at the end of this manual.
Grease the connector according to
the manufacturer’s instructions.
2.
Press the connector together with the tether
until it is fully seated. Wipe the excess grease
from the connector.
3.
Hook up the strain relief that is on the
tether to the tail of the vehicle.
4.
Locate the magnet sensor. Apply the
magnet key to the sensor location
until the camera wiggles to power the
vehicle on. A green LED will light up
on the right side of the camera
indicating power is on.
