22
ART-NTU-XUNIMPN000
–
Instructions for use and use Unikart Classic Motorized
UNIKART trolley for a
maximum of 136 kg.
8)
ATTENTION! THIS STEP IS DIFFICULT!
Plus il y a de poids, plus cette étape exigera de la force.
Enlever grâce à la poignée (possibilité de la tourner comme une vis) l’axe maintenant le vérin,
normalement le siège et la personne ne doivent pas bouger, sinon resserrer la manivelle (sens
horaire) ! Attention ! Les pièces maintenant le vérin tombent.
DO NOT DEROULER THE STRAP,
RISK OF FALL OF THE SEAT AND THE PERSON.
If you can not unpin the jack, winding the strap
(clockwise) should help (The more the strap is stretched, the more the seat goes up and the
easier it is to unhook the jack).
9)
Once the cylinder is unpinned you can mount the device (clockwise on the crank). Check that
the cylinder does not prevent the climb by blocking in certain places.
10)
Once this procedure is done and the device reassembled,
DO NOT USE THE DEVICE!
Contact
the service of Hexagon who will make an intervention to repair the device. (Change of the
straps, winch, cylinder or other equipment if necessary).
IN NO EVENT SHOULD THE SAFETY WINCH BE USED FOR RIDING OR DESCENDING PEOPLE. AT THE
END OF THE PROCEDURE, THE APPLIANCE BECOMES OUT OF SERVICE.
In no event will the responsibility of Hexagone Manufacture be questionable and this emergency
procedure is under your responsibility.
Council : Perform the empty procedure once a quarter during periodic system checks
