13
ART-NTU-XUNIMPN000
–
Instructions for use and use Unikart Classic Motorized
UNIKART trolley for a
maximum of 136 kg.
5 - Montage de démarrage de l’Unikart Motorisé
1)
WARNING !!
When unpacking, carefully hold the seat before cutting the plastic film. Because
the seat is not held by the jack it would fall to the ground.
2)
Open the packaging and check the condition of the device.
ATTENTION
read the complete
assembly instructions.
3)
WARNING !!
When opening the device, the seat is not attached to the cylinder, it can fall.
Keep it in position when unpacking and lay it gently on the ground.
4)
To fix the cylinder go down (with the remote control) this one and to center the second hole
of the pantograph with the hole of the jack.
ATTENTION
to the friction or fall of these parts.
5)
Once the two pieces center pass the handle with the two largest stainless steel spacers
outside the cylinder and the thinnest in the middle of the cylinder. Screw the knurled knob.
6)
Raise the cylinder and the seat with the remote control.
7)
Place the 180 kg weight evenly distributed on the three bars at the rear of the unit (12 disks
per bar).
8)
Your device is ready for use.
Pictures of montage :
Handle
Outside spacer (Long)
Inside spacer
(Courte)
Button
knurled
Final positioning
Motorized Unikart ready to operate.
The cylinder is positioned on the
second hole (not the first).
