ANNEXES
A) FELT PAD - INSTRUCTIONS FOR USE
Note:
The felt pad is not a part of the pool package. Please contact your dealer
for details.
The unwoven textile “NETEX S” (material for felt pads) is made of 100% polypropylene
staple fibres of a white colour. It is used as a filler, drainage and separation geo-textile
during construction of roads and railways, dump areas, airports, storage and parking
areas, etc. It is also used for protecting pool liners and separating them from the base.
Felt Pad Characteristics
The fibres used for producing the pad are subject to aging in the light after a certain time (known as photo degradation). This is why it
is unsuitable to store the felt pad freely. It should be stored in a cardboard box or in the foil which is stabilised from UV radiation.
The unwoven textile is resistant to technical petrol, perchloro-based substances, oil and other chemicals of a similar nature, to fungus
growths and micro-organisms. It is not harmful to health.
Laying the pad for the pool with a corner filling
Install the felt pad after you have assembled the pool wall and made the internal corner filling by using the sieved pit sand. Place the
pad on the bottom inside the pool, centre it and align possible folding pieces. Cut away several centimetres above the corner filling.
While doing so, make sure that no stones or other sharp objects get to the upper side of the pad.
Round Satinwood Pool
17
