Aqua To Go AQUA Cold, Руководство пользователя

Страница: 4 / 12

Page 4 of 12
PARTS AND FEATURES
SPECIFICATIONS
Model Name: AQUA Cold/Room Beach Water Cooler
Model Number: ATGABTCOOL
Voltage: 220-240V AC/1PH/50 Hz.
Water Cooler Size : 37cm (H), 27.5 cm (W), 25cm (D)
Shipping Weight: 3.7kg approx
Rated Frequency: 50Hz
Rated Power Input (total): 75W
Rated Power Input (cooling): 0.34A
Climate Class: ST
Protection Class: I
Note: Specifications and content of this manual are subject to update and change without notice.
UPON RECEIVING YOUR COOLER
Thank you for purchasing an AQUA TO GO water cooler. Your cooler has been inspected in accordance
with our factory’s comprehensive Quality Assurance Checklist. Inspect your cooler and should you find any
material defects or have any queries please read Trouble Shooting p.11 and contact our customer service
centre promptly on ph 1300 760 474 or service@aquatogo.com.au, before you contact Officeworks.
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock or injury, please follow these basic precautions when using your
cooler:

This cooler is designed to be safe in the use for which it was planned provided that it is installed,
started up and maintained in accordance with the instructions contained in this manual. Please
carefully read this manual before using the water cooler.

Leave cooler standing for 2 hours, and then dispense a cup of water from both taps, before plugging
into the power and turning on the power switches on the back.

Remove all packaging before using the water cooler.

This cooler must be stored and transported upright.

This cooler contains electrical components that operate at mains voltage, 240v. It therefore must be
isolated from the electrical supply before being serviced.

All maintenance operations that require internal access to the cooler must be carried out by a suitably
qualified technician who has a thorough understanding of all necessary precautions associated with
servicing the cooler. All panels must be re-installed after carrying out any maintenance work.

Any electrical work must only be carried out by a qualified electrician.

Electrical connection should be in accordance with all the relevant local safety standards for wiring
safety.

Do not have the rear power switch on without water in tank.

Don’t use mechanical devices or other means to accelerate the defrosting process.

Never clean parts with flammable fluids. The fumes can create a fire hazard or explosion.

Do not store or use petrol or any other flammable vapors and liquids in the vicinity of any water
cooler. The fumes can create a fire hazard or explosion.

Do not use this cooler to chill any liquids other than approved spring water.

Improper use of the grounded plug can result in the risk of electrical shock. Don’t cut or remove the
3
rd
(ground) prong from the power cord under any circumstances.

If the electric supply cord is damaged the cooler must not be used and the cord or plug must first be
replaced by a qualified electrician.