Aqua To Go AQUA Cold, Руководство пользователя

Страница: 3 / 12

Page 3 of 12
QUICK START SUMMARY
1.
UNPACK
Carefully remove all packaging and put all parts in one safe place.
2. CHECK ALL PARTS AND ENSURE IT’S WORKING
Check that you have received all required parts. In the unlikely event that some part is missing or the
water cooler is not working then please contact our Service Centre asap.
AQUA TO GO contact details – ph 1300 760 474 or service@aquatogo.com.au
3.
REGISTER YOUR WARRANTY NOW
Please register, within 2 days of purchase, your product warranty at www.aquatogo.com.au
4.
COOLER PLACEMENT
Place your water cooler in an area that is:

Close to a power point, out of significant direct sunlight. Do not plug it in yet.

Well ventilated and dust/dirt free. Place cooler at least 10cm away from any wall.

Able to safely support the weight of the cooler with a bottle of water fitted.

Water safe for when usage drips occur or in the unlikely event of leakage. E.G. do not place near
other electrical equipment or on flooring that may be damaged by water.
Note: Never lift or carry your cooler by its taps or with bottle installed. Such action may damage the
taps and will void the product warranty.
5. PRE RINSE
Your water cooler has been pre cleaned but the tank and water lines should be flushed. Gently twist the
spike anticlockwise and lift off the top cover. Slowly pour fresh tap or spring water into the tank so that
the water tank is nearly full. Using the grey tap first, and when the water stops use the blue tap, empty
this water into a bucket. Taste the water now and if it has a bad taste then please refer to cleaning
instructions – see page 9. If everything is ok then ensure that the top cover is properly secured back on
- place into the slots, hold the spike and gently twist clockwise. Any issues please contact Aqua To Go.
6.
INSTALLING A BOTTLE
Gently lower your AQUA TO GO water bottle onto the water intake spike. Please read any installation
instructions found on the bottle/cap. Store all spare bottles in a cool place, out of direct sunlight.
7. WATER TEMPERATURE
Let your water cooler run for 60 minutes to achieve optimal cold water temperature. Press the blue tap
for cold water and the grey tap for closer to room temperature water.
YOU ARE NOW READY TO ENJOY YOUR PREMIUM SPRING WATER
Please also read, in particular, the following sections: Cleaning, Troubleshooting
AQUA TO GO CUSTOMER SERVICE
HAVE A QUESTION?
Ph: 1300 760 474
Or email service@aquatogo.com.au