background image

4

GB

Important Safeguards

To  guard  against  injury,  basic  safety  precautions 

should be observed, including the following:

1. Read and follow all safety instructions and important 

notices in these instructions as well as on the product 

itself.

2. This  appliance  is  not  intended  for  use  by  children 

or infirm persons without supervision. Young children 

should be supervised to ensure that they do not play 

with the appliance.

3.  To  avoid  possible  electric  shocks,  special  care 

should  be  taken  since  water  is  employed  in  the  use 

of  aquarium  equipment.  For  each  of  the  following 

situations do not attempt repairs yourself. Return the 

appliance to an authorised service facility for service or 

discard the appliance.

a. If the appliance or any electrical component of the 

appliance  (non-immersible  equipment  only)  falls  into 

the water or gets wet, do not reach for it. Unplug it and 

then retrieve it.

b. If the appliance shows any sign of abnormal water 

leakage, immediately unplug it from the power source.

c. Carefully examine the appliance after installation. It 

should not be plugged in if there is water on parts which 

are not intended to be wet.

d.  Do  not  operate  the  appliance  if  it  has  a  damaged 

cord  or  plug,  or  if  it  is  malfunctioning,  or  dropped  or 

damaged in any manner.

4. A “drip loop” (see graphic) should be arranged for 

each cable connecting an aquarium to a power supply. 

The drip loop is the part of the cable below the level of 

the power supply. It prevents water travelling down the 

cable and coming into contact with the power supply. If 

the plug or the socket does get wet, do not unplug the 

appliance. Disconnect the fuse or circuit breaker that 

supplies the power to the appliance, then unplug and 

examine for presence of water in the socket.

5. Always unplug the appliance from the electrical outlet 

when not in use, before putting on or taking off parts, 

before any type of maintenance or cleaning.

6. Never yank the cable to pull it from the socket. Pull 

the plug carefully to disconnect.

7.  Do  not  use  the  appliance  for  reasons  other  than 

the intended use. The use of attachments that are not 

recommended or sold by the manufacturer may cause 

the product to be unsafe. This is not recommended.

8. Do not install or store the appliance where it will be 

exposed to weather or temperatures below freezing.

9.  Make  sure  any  component  mounted  on  a  tank  is 

securely installed before operating it.

10. Ensure input voltage is the same voltage as your 

local power supply.

11.  If  an  extension  cable  is  used  it  should  have  the 

proper rating. Care should be taken to arrange the cord 

so that it will not be tripped or pulled.

12. A G.F.C.I (Ground fault circuit interrupter) & surge 

protector is recommended for all electrical appliances.

13. Ensure your hands are dry when turning the power 

switch  on/off  and  when  inserting/removing  the  power 

cable from the socket.

14. If you are in any doubt about the electrical installation 

or safety of this product you must consult a qualified 

electrician.

For  Guarantee  Conditions,  please  refer  to  the 

Guarantee form that is enclosed with this product.

All  products  are  supplied  with  fitted  plugs.  This  plug 

should not be tampered with in any way or removed. 

Removal  or  tampering  with  the  plug  invalidates  our 

guarantee offered with this product.

For UK a 3 pin adaptor is supplied with the product and 

this must be used.

Содержание Moray Series













Отзывы: