background image

Important Safeguards

This appliance is not intended for use by 
children or infirm persons without supervi-
sion. Young children should be supervised 
to ensure that they do not play with the appli-
ance. 

Warning: To guard against injury, basic 
safety precautions should be observed, 
including the following:

1. Read and follow all safety instructions before 
using this appliance.

2. Danger: To avoid possible electric shocks, spe-
cial care should be taken since water is employed 
in the use of aquarium equipment. For each of the 
following situations do not attempt repairs yourself. 
Return the appliance to an authorised service facil-
ity for service or discard the appliance.

a) If the light falls into water, do not reach for it, 
unplug it and then retrieve it. If the electrical com-
ponents of the appliance get wet, unplug the appli-
ance immediately (non immersible equipment 
only).

b) If the aquarium shows any sign of abnormal 
water leakage, immediately unplug it from the 
power source.
 
c) Carefully examine the aquarium after installa-
tion. It should not be plugged in when there is water 
on parts which are not intended to be wet.

d) Do not operate any aquarium component if it has 
a damaged cord or plug, or if it is malfunctioning, or 
dropped or damaged in any manner.

A “drip loop” (See the diagram) should be arranged 
by the user for each cord connecting an aquarium 
component to a receptacle. The drip loop is the part 
of the cord below the level of the receptacle or the 
connector if an extension cord is used. It is used to 
prevent water traveling along the cord and coming 
in contact with the receptacle.
If the plug or receptacle does get wet, do not 
unplug the appliance. Disconnect the fuse or circuit 
breaker that supplies the power to the appliance, 
then unplug and examine for presence of water in 
the receptacle.

3. Close supervision is necessary when the appli-
ance is used by or near children.

4. Always unplug the aquarium from the electri-
cal outlet, when not in use, before putting on or 
taking off parts, before any type of mainte-
nance,

or cleaning. Never yank the cord to pull it from 
the outlet. Grasp the plug and unplug to discon-
nect.

5. Do not use the aquarium for reasons other 
than the intended use. The use of attachments 
that are not recommended or sold by the 
aquarium manufacturer may cause the product 
to be unsafe. This is not recommended.

6. Do not install or store the aquarium where it 
will be exposed to weather or temperatures 
below freezing.

7. Make sure any component mounted on a 
tank is securely installed before operating it.

8. Read and observe all the important notices 
on the aquarium and all components.

9. Ensure input voltage is the same voltage as 
your local power supply. 

10. If an extension cord is necessary, a cord 
with a proper rating should be used. Care 
should be taken to arrange the cord so that it 
will not be tripped or pulled.

11. A

 G.F.C.I

 (Ground fault circuit interrupter) & 

surge protector is recommended for all electri-
cal appliances.

12. Ensure your hand is dry when turning the 
power switch on/off and when 
inserting/removing the power cord from the 
receptacle. 

13. If you are in any doubt about the electrical 
installation or safety of this product you must 
consult a qualified electrician.

For Guarantee Conditions, please refer to 
the Guarantee form that is enclosed with 
this product.

Drip loop

Содержание AquaReef 200











Отзывы: