12
4. Inflate the floor (only BT-88830)
Inflation valve operation for BT-88830
1. Open the external cap and pull firmly to make it pushed out. (Fig.1)
2. Attach a suitable adapter nozzle to the inflation end of the pump. Insert the pump and start
pumping. (Fig.2)
3. When the boat is fully inflated, gently twist the adapter sleeve to right while backing pump out
of the valve. (Fig.3)
4. Fully remove the adapter and close the external stopper. (Fig.4)
After inflation, make sure the pressure of boat deck is 0.04bar.
NOTES
: Check the pressure every time before usage. Air temperature and weather conditions
do affect the internal air pressure of inflatable products. In cold weather the product will lose
some pressure due to the fact that the air will contract. If this occurs, you may want to add a
little air to the product. However, in hot weather, the air will expand. You must let some air out to
prevent the product from failing due to overpressure.
• Only use Aqua Marina® approved inflation pumps.
• Never use motor-driven high-pressure air pumps as this may result in over-inflation. Fill with
cold air only.
• Under and over-inflation will result in safety hazards.
• Always check the inflation pressure before using the boat.
• Never stand on or rest objects on the boat during inflation.
• Never open the cap of air valve while the boat is in use.
• Be sure the valve is tightly closed before using the boat.
ACCESSORY ASSEMBLY
1. Wooden bench seat installation
Slide the bench seat into the position by inserting the flaps on both chamber of the boat into
notches on the Seat Board. Optional accessory like Swivel Seat (B0301762) can be installed on
the top of bench seat for fishing.
2. Insert the plug into the drain valve on the transom
Always make sure the plug is secured into the valve before launching the boat and do not open
while afloat.
Fig.1
Fig.2
Fig.3
Fig.4
