9
Fig.2
b. Insert second and last sections of the floor.(Fig.2)
1.3 BT-06300WD/BT-06330WD/BT-06360WD
1.1 Start the assembly from deck board installation. Insert the Board #1 into the bow and push it
forward until the Air Valve of the inflatable Keel is aligned with the hole on the board. (FIG. 1)
1.2 Insert the Board #4 into the stern and push the board under the transom. (FIG. 2)
1.3 Connect the Board #1 with Board #2 by inserting the “
I
” shape stringer. (FIG. 3)
1.4 Connect the Board #3 with Board #4 by inserting the “
I
” shape stringer. (FIG. 4)
1.5 Connect the Board #2 with Board #3 by inserting the “
I
” shape stringer (FIG. 4)
2
3
4
1
4
1
4
3
2
1
Tip:
It's better to inflate the boat about 20% before wooden floor installation.
Fig.4
d. Inflate left and right tube of the boat firstly and then inflate bow section of the boat. Finally,
inflate the keel. Use hand pump to finish.
Fig.1
a. Insert front bow section of the floor.(Fig.1)
Fig.2
Fig.1
Fig.3
Fig.4
