6
SET UP INSTRUCTION
UNFOLD THE BOAT
Choose a smooth and clean surface to
spread the boat out so that the inflatable
chambers can fill easily.
SLAT WOOD INSTALLATION (for BT-88810)
Clear a flat area (make sure it is clean and free of sharp objects). Remove the hull from box and
take off the plastic bag. BT-88810 is the easiest tender to set-up, it has slat floorboards ready to
be assembled, so just unroll the hull and lay it out. Insert the five slat wood deck boards with
proper order into boat floor.
ALUMINUM FLOOR INSTALLATION
1. BT-88850AL
1.1 Start the assembly from deck board installation. Insert the Board #1 into the bow and push it
forward until the Air Valve of the inflatable Keel is aligned with the hole on the board. Lift the
sides of the boat as necessary in order to slide the Board #1 into place. (Fig. 3)
1.2 Insert the Board #3 into the stern and push the board under the transom. (Fig. 2)
1.3 Align the slot on the Board #1 with the protrusion of Board #2 and push the two pieces
together. (Fig. 4)
1.4 Lift up Board #2, align the protrusion of Board #2 with the slot on the Board #3 and push the
two boards down making them flush. (Fig. 4)
1.5 Attach the two side stringers to keep the floorboards securely in place. (Fig. 1)
2. BT-06300AL/BT-06330AL/BT-06360AL
1.1 Start the assembly from deck board installation. Insert the Board #1 into the bow and push it
forward until the Air Valve of the inflatable Keel is aligned with the hole on the board. (Fig. 1)
1.2 Insert the Board #4 into the stern and push the board under the transom. (Fig. 2)
1.3 Align the protrusion of Board #1 with the slot on the Board #2 and push the two pieces
together. (Fig. 4)
Fig.1
Fig.2
Fig.3
Fig.4
1
1
2
3
1
2
3
3
2
3
1
1
4
4
Fig.1
Fig.2
Fig.3
Fig.4
