STEP 6: TOP SEAT AND SEAT CAP INSTALLATION
UPRIGHT CLIP
6.1: Place the top of the support post on the wall and insert
the upright clips. The upright clips snap onto the top of the post
by applying a simple pressure thus securing the wall and the
post together.
TOP SEAT INSTALLATION
6.2: Position and place the top seat on the support posts.
The top seat for the round section must be pushed toward the
inside part of the pool and the openings on the top seats must
align with the holes on the top of the posts.
6.3: Insert partially the ¾ “ screws on the top. Distribute evenly the space between the top seats to center
them between the posts.
6.4: When all the top seats are all in place, fill the pool up to 2 feet beneath the edge of the pool before
continuing.
6.5: Make sure to put at level the two axes of the posts by
pushing slightly inwards before tightening the screws
permanently. Install all the necessary equipment (skimmer,
filter, etc..) by following the directives of the manufacturers.
18
