5.2.2 - A2: Bead liner
Hang the bead of the liner at the top of the wall. As the bead is
installed, place the top wall channel and ensure that the
channels are centered in the middle of the posts.
“Snap-In” liner
For a “snap-in” liner, the bead hook is inserted into the groove, which is designed for that type of liner.
5.2.2 - A3: Proceed for the rest of the wall.
NOTE : Do not install the liner on both sides simultaneously. Be careful not to create wrinkles. Install
the liner from one point to the end by following one direction.
5.2.2 - A4: Before proceeding further, check the gap between the top wall channels, it should be roughly
similar to the bottom wall channels.
14
