3.8: Install the bolts and nuts into each hole (the quantity of
screws corresponds to the amount of holes).
IMPORTANT!
All holes of the aluminum bars must be filled
3.9: Make sure that the bolt heads are on the interior side of the pool.
IMPORTANT REMINDER!
Due to the enormous pressure exerted against the pool wall, it
is essential to screw in all bolts tightly.
- Begin at the bottom of the wall and work up.
- Every holes covered by the aluminum bar must be used.
- Make sure the pool wall is resting securely in the bottom of the
wall channels and it makes a perfect circle.
- Bolt heads must be on the interior, and nuts and washers on
the exterior.
- File off any burrs, and cover all bolt heads with a heavy fabric
tape before putting on the vinyl liner.
9
