Aqua-Air Wet/Dry 130, Руководство пользователя

Страница: 10 / 23

HELPFUL TIPS
8

Do not allow motor to remain on unless a hose is connected and
in use, or an inlet valve is open. If air is not permitted to flow
through fan blades, motor damage may occur.

Check debris screen on a regular basis, particularly when
vacuuming new carpets or picking up bulky items such as wood
shavings. Replace when two-thirds full.

The guard screen located in the separation tank above the cone
may have become clogged with debris. The guard screen is not
removable.

CAUTION: When using the residential wet/hose and tools,
connect the tool to the hose before connecting the water line to
the wall. Water can inadvertently be sprayed out if trigger is
depressed.

When wet vacuuming, clean the hose and tools after each time they
are used. When cleaning is completed, rinse hose and tools by
sucking up water from a pail or sink, being careful to not fully
submerge the hose in water. Then allow vacuum to run for a few
minutes to dry out hose and line.

If possible, leave holding tank (bottom chamber of the power unit)
open when not in use to air out. Depending on use, sucking a
gallon of premixed Aqua-Air Bio-enzyme cleaner/degreaser - Part
#SC05GL (8 oz in one gallon of warm water) will freshen hoses,
piping and holding tank.

Wipe off tools and hose and store the hose on hose hanger. Loop
it over 3 -4 times so it hangs loosely on the rack.

To prevent odor in system, empty or replace debris screen regularly.