Page 28
Translation of the original operating manual
Platform kit accessories kit
For easier maintenance of the pneumatic seeder PS 120 - 200
M1 and multi-metering system MDP 100 M1, a suitable platform
kit is available as an accessory. Please note that it must be
mounted in compliance with ISO 4254-1.
Item no.:
07027-2-017: platform kit accessories kit VS 150 M1
07028-2-013: platform kit accessories kit VS 300 M1
Figure 32
Dispersion plate installation
When a seeder is mounted on the VS 150 M1 / VS 300 M1,
brackets are required for the dispersion plates. The dispersion
plates are positioned in front of the tine section as a standard.
Everything is already installed ex-factory.
Note: 8 dispersion plates are required when using a Pneumatic
Seeder PS. When using a Multi-Metering System MDP, 6
dispersion plates are required.
Item no.:
07027-2-020: dispersion plate installation accessories kit 8 outlets
for VS 150 M1 (for Pneumatic Seeder PS)
07027-2-021: dispersion plate installation accessories kit 6 outlets
for VS 150 M1 (for MDP)
07028-2-014: dispersion plate installation accessories kit 8 outlets
for VS 300 M1 (for Pneumatic Seeder PS)
07028-2-015: dispersion plate installation accessories kit 6 outlets
for VS 300 M1 (for MDP)
Figure 33
Manual tine lifting
With the manual tine lifting, individual tines can be lifted, e.g. to
avoid working in rows where the plants are already taller. As a
result, the harrow can be optimally adjusted for crops grown on
beds.
Either the entire harrow can be equipped with manual tine lifting
or any number of tine lifting mechanisms can be selected. To
actuate the tine lifting mechanism, the plate is simply pushed
towards the tine.
Item no.:
07027-2
-024: tine lifting accessories kit for VS 150 M1
07028-2-019: tine lifting accessories kit for VS 300 M1
07014-2-351: individual tine lifting
Figure 34
Front headstock accessories kit
An additional headstock can be installed on the VS 150 M1 & VS
300 M1 to operate the harrow at the front and rear.
Item no.:
07027-2-008: front headstock accessories kit for VS 150 - 300
M1
07027-2-025:. hydraulic hose extension accessories kit for VS 150
- 300 M1
Figure 35
