APV Tined Weeder Pro VS 150 M1, Руководство по эксплуатации

Страница: 27 / 32

Translation of the original operating manual Page 27
16 Accessories

Tines with carbide coating
To reduce tine wear, the VS 150 M1 / VS 300 M1 can be
equipped with tines with carbide soldered on. Endurance tests
show that these tines are worn much more slowly. This extends
the service life of the tines until they need to be replaced
considerably. The soldered carbide platelet is 60 mm long.
Carbide tine item no.:
07027-2-016: carbide tine accessories kit for VS 150 M1
07028-2-012: carbide tine accessories kit for VS 300 M1
Figure 28

Warning signs and lighting
Warning signs with lighting are also available as an accessory for
the VS 300 M1. Please always specify your serial number for
retrofits!
Please note that separate warning signs with lighting are
available for front mounting operation of the VS 300 M1.
Item no.:
07028-2-024: warning sign + lighting VS 300 M1
07028-2-025: warning sign + lighting VS 300 M1 front
Figure 29

Feeler wheels accessories kit
The rear-mounted VS 150 M1 / VS 300 M1 can be equipped with
rotating feeler wheels. For front mounting, only rotating feeler
wheels should be used.
All feeler wheel brackets can be shifted in the width as required to
adjust the track width.
Item no.:
07027-2-018: Rear feeler wheel accessories kit for VS 150 - 300
M1
07027-2-022: Front feeler wheel accessories kit for VS 150 - 300
M1
Figure 30

Pneumatic Seeder or Multi-Metering System
bracket accessories kit
This bracket is used to mount a pneumatic seeder PS 120 - 200
M1 or multi-metering system MDP 100 M1 on the VS. Please
note that it must be mounted in compliance with ISO 4254-1.
Item no.:
07027-2-019: pneumatic Seeder bracket accessories kit
07027-2-032: multi-Metering System bracket accessories kit
Figure 31