manualshive.com logo in svg

APRILIA TUONO 1000 - 2006, Руководство пользователя

Поделиться
Скачать
APRILIA TUONO 1000 - 2006 Скачать руководство пользователя страница 75

75

use and maintenance  

TUONO 1000 

USA

STOPPING

WARNING

If possible, avoid stopping abruptly,
slowing down suddenly and braking at
the last minute.

F a i l u r e   t o   c o m p l y   w i t h   t h e s e
instructions may cause an accident
with consequent risk of serious injuries
or even death.

u

Release the throttle grip (1) (

Pos. A

),

gradually put on the brakes and at the
s a m e   t i m e   s h i f t   d o w n   i n   o r d e r   t o
decrea se  the  speed, see p age 70
(RIDING).

Once the speed has decreased, before
stopping the vehicle:

u

Pull in the clutch lever (2) in order to
prevent the engine dying.

When the vehicle has come to rest:

u

Position the shift lever (3) in neutral
(green warning light “

” (4) on).

u

Release the clutch lever (2).

u

If you are stopping just briefly and not
shutting down the engine, keep one
brake applied.

PARKING

It is very important to choose a suitable
parking area, respecting the road signs
and the indications given below.

WARNING

Park the vehicle only on firm flat ground,
otherwise it could fall over.

Do not lean the vehicle against walls, do
not lay it on the ground.
Park your vehicle away from children
and pedestrians, so that they will not
come in contact with hot parts.
Do not leave your vehicle unattended
with the engine running or with the key
in the ignition switch.
Do not sit on the vehicle when the side
stand is extended.
Do not get too close to the cooling fans.
Even though they are not moving, they
could start automatically and suck
clothing, hair, etc. into the fan.

1

2

2

3

4

APRum_TUONO_MY05_####.book  Page 75  Monday, January 9, 2006  2:53 PM

Содержание TUONO 1000 - 2006

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды