manualshive.com logo in svg

APRILIA TUONO 1000 - 2006, Руководство пользователя

Поделиться
Скачать
APRILIA TUONO 1000 - 2006 Скачать руководство пользователя страница 70

use and maintenance  

TUONO 1000 

USA

70

WARNING

In the  event of  a thr ottle  stic king
emergency, always kill the engine using
the engine stop switch located near the
throttle grip on the right handlebar. Never
use your vehicle if the throttle does not
automatically fully return to the idle
po s it i o n   w he n   t h e  t h r o t t l e   g r i p   i s
released. Contact your Local 

aprilia

Dealer for repairs. Failure to observe this
warning can lead to a serious accident
and result in injury or even death.

WARNING

After the engine has started, the engine
oil pressure icon "

" (11) must go off. If

the oil light stays on or comes on during
normal operation, it means that oil
pressure in the circuit is too low. 
When this is the case, stop the engine
immediately and contact an Official

aprilia 

dealer.

CAUTION

Never ride off briskly with a cold engine.
Allow the engine to warm up by riding
slowly for the first few miles.

WARNING

If the “

 SERVICE” symbol (12) appears,

on the (multifunction) display during
normal engine running, this means that
the electronic unit has detected a fault. In
many cases, the engine keeps running
with reduc ed per formance levels ;
immediately contact your Local 

aprilia

Dealer.

RIDING

Before riding away, carefully read the
“safe drive” chapter, see p. 19 (SAFE
DRIVE).

CAUTION

If the low fuel warning light “

” (1)

positioned on the dashboard comes on
while the vehicle is running, this means
that there are still 1.19 ± 0.26 US gal (4.5
± 1 

b

 ) of fuel available, refuel as soon as

possible, see page 47 (FUEL).

WARNING

I f   y o u   a r e   r i d i n g   s o l o ,   w i t h o u t   a
passenger, make sure the passenger
footrests are folded up.
Never take your hands off the hand grips
nor your feet off the footrests while you
are riding.

12

11

1

APRum_TUONO_MY05_####.book  Page 70  Monday, January 9, 2006  2:53 PM

Содержание TUONO 1000 - 2006

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды