APRILIA SR 50 - 2001 Скачать руководство пользователя страница 69

Страница: 69 / 104

use and maintenance

SR 50

REMOVING
THE COVER SUPPORT ELEMENT

Carefully read p. 55 (MAINTENANCE).

♦

Place the vehicle on the center stand.

♦

Rotate the handlebar completely, unscrew
and remove the screws (1).

♦

Remove the cover support element (2).

NOTE

Upon reassembly, fit the tangs

correctly in the appropriate seats.

CAUTION

REMOVING THE FRONT COVER

Carefully read p. 55 (MAINTENANCE).

♦

Remove the cover support element (2), see
beside (REMOVING THE COVER
SUPPORT ELEMENT).

♦

Rotate the handlebar completely, unscrew
and remove the screws (3), taking the
washers.

Proceed with care.
Do not damage the tangs and/or their
seats.

Handle the plastic and painted
components with care and avoid scraping
or damaging them.

♦

Remove the front cover (4), by pulling it
upwards.

NOTE

Upon reassembly, correctly insert

the lower tang (5) and successively the two
side tangs (6) in their seats.

Содержание SR 50 - 2001









































































































Результаты поиска

Содержание SR 50 - 2001

Отзывы:

APRILIA SR 50 - 2001, Руководство пользователя, Страница: 69 / 104

Результаты поиска

Содержание SR 50 - 2001

Отзывы: