APRILIA RSV MILLE, Руководство по ремонту

Страница: 58 / 386

SERVICE AND SETTING UP
RSV mille
2 - 9
2.3.2 SWITCHING FROM km TO mi (from km/h to
MPH) AND VICEVERSA (LEFT DISPLAY)
◆
Press the push button
l
until, after about five seconds,
all the writings (12) on the left display start blinking.
◆
Release the push button
l
.
◆
Press the push button
k
to change the unit of meas-
urement from “ km ” to “ mi ” (from “ km/h ” to “ MPH ”) or
viceversa.
◆
To confirm the setting, press the push button
l
for
about five seconds.
2.3.3 SETTING THE INSTANTANEOUS, MAXIMUM
AND AVERAGE SPEED (LEFT DISPLAY)
NOTE
Two seconds after the vehicle has started mov-
ing, the instantaneous speed is automatically shown on
the display, even if a different function is set.
When the ignition key is rotated to position “
2
”, the in-
stantaneous speed (9) and the partial number of kilome-
tres/miles covered “trip 1” (10) appear on the left display.
Resetting “trip 1” (10): with the odometer set on the in-
stantaneous speed function, press the push button
r
for
about two seconds.
◆
To display the maximum speed (14) and the distance
“trip 1” (10), press the push button
k
for about one sec-
ond. The writing “ V max ” (15), the maximum speed
(14) and the distance “trip 1” (10) are displayed.
Resetting the maximum speed (14): with the odometer
set on the “
V max ” function, press the push button
r
for
about 2 seconds.
NOTE
The measurement of the maximum speed is rel-
evant to the distance covered from the last setting to zero
of the maximum speed itself. The distance “trip 1” (10)
shown on the display indicates the number of kilometres/
miles covered from the last setting to zero, to the distance
“trip 1”.
◆
To display the average speed (16) and the distance
“trip 2” (17), press the push button
k
again for about 1
second.
The writing “ AVS ” (18), the average speed (16) and the
distance “trip 2” (17) are displayed.
Resetting the average speed (16) and the distance “trip
2” (17): with the odometer set on the “
AVS ” function,
press the push button
r
for about 1 second.
NOTE
The measurement of the average speed is rele-
vant to the distance “trip 2” (odometer).
The distance “trip 2” (17) shown on the display indicates
the number of kilometres/miles covered from the last set-
ting to zero.
If more than 1000 km (625 mi) are covered without setting
“trip 2” to zero, the value of the average speed will be
wrong.
To display the instantaneous speed (13) and the distance
“trip 1” (10), press the push button
k
again.
Release 00/2002-10
- 00