APRILIA RSV MILLE, Руководство по ремонту

Страница: 105 / 386

SERVICE AND SETTING UP
2 - 56
RSV mille
2.32.3 CHECKING THE REAR SUSPENSION
LINKAGE
Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
Rear suspension linkage bearings:
for the maintenance intervals, see 2.1.1 (REGULAR
SERVICE INTERVALS CHART).
For the check, proceed as follows:
NOTE
Have someone help you keep the vehicle up-
right during this operation.
◆
Grip the rear part of the vehicle firmly (see figure),
press down and release a few times.
◆
If the movement is not smooth and is accompanied by
squeaks and/or if you notice any slack, change the
bearings of the rear suspension linkage, see 7.10.4
(DISASSEMBLING THE REAR SUSPENSION LINK-
AGE).
◆
If, after you pressed the vehicle downwards, it returns
to its original position very slowly, check if the rear sus-
pension is adjusted correctly, see 2.31.2 (ADJUSTING
THE REAR SHOCK ABSORBER).
◆
If, after the adjustment, the defect persists, this means
that the shock absorber bumps through and must
therefore be reloaded.
&2/.4 7(%%,
Carefully read 0.5.1 (PRECAUTIONS AND GENERAL
INFORMATIONS).
Wheel bearings:
for the maintenance intervals, see 2.1.1 (REGULAR
SERVICE INTERVALS CHART).
For the check, proceed as follows:
◆
Position the vehicle on the special front support stand
m
.
◆
Spin the wheel in either direction by hand.
◆
Make sure that the wheel rotation is regular and that
there are no obstacles or noise, otherwise change the
bearings, see 7.2.9 (DISASSEMBLING THE FRONT
WHEEL BEARINGS).
◆
Should any wobbling be noticed as the wheel spins,
check the relevant components, see 7.2.2 (CHECKING
THE FRONT WHEEL COMPONENTS).
◆
If, after various spins, the wheel continues to stop in the
same place, the wheel needs balancing.
Release 00/2002-10
- 00