21
use and maintenance SL mille
MULTIFUNCTION (RIGHT DISPLAY)
The right display (multifunction) includes
the coolant temperature in °C (°F) (8) and
the digital clock (7) as standard settings.
NOTE
When the engine is cold, the writ-
ing “
×
” blinks.
By pressing the push button
D
, the follow-
ing functions can be obtained in sequence:
STANDARD SETTING:
COOLANT TEMPERATURE
AND DIGITAL CLOCK
The coolant temperature value (8) is
shown in the upper part of the right display.
It is possible to switch from °C to °F and
viceversa, see p. 22 (SETTING °C OR °F).
– When the temperature is below 35°C
(95°F), the writing “
×
” (8) blinks on
the right display.
– When the temperature is over 115°C
(239°F), the value (8) blinks on the right
display, even if a function different from
the standard setting has been set.
– When the temperature is over 130°C
(266°F), the writing “
///
” (8) appears
on the right display.
a
CAUTION
If the writing “
///
” is displayed with a
temperature below 130°C (266°F), there
may be a failure of the electric circuit. In
this case, contact an
APRILIA
Official
Dealer.
Thermometer range on the display:
35 – 130°C (95 – 266 °F).
The digital clock (7) appears in the lower
part of the right display.
To set or modify hour and minutes, see p.
22 (SETTING THE HOUR) and p. 22
(SETTING THE MINUTES).
BATTERY VOLTAGE - VBATT
◆
If the push button
D
is pressed once, the
battery voltage expressed in volt (19) ap-
pears in the lower part of the right dis-
play, while the coolant temperature (8)
is displayed in the upper part.
The writing “V BATT” (20) is displayed.
The recharge circuit functions correctly
if at 4000 rpm the battery voltage with
low beam on is included between 13
and 15 V.
Standard setting:
temperature in °C and digital clock
D
Battery voltage (V BATT)
D
Hour setting
D
Minute setting
D
°C or °F setting
Ing-01.fm Page 21 Friday, December 17, 1999 11:14 AM
