25
use and maintenance SL mille
The high beam blinking is operated by pressing the push
button, independently of the position of the light switch (
o
-
p
- •).
NOTE
To disconnect the high beam blinking, release the
push button.
6) COLD START LEVER (
e
)
The starter for the cold start of the engine is operated by rotat-
ing the lever “
e
” downwards.
To disconnect the starter, move the lever “
e
” to its initial po-
sition.
#/.42/,3 /. 4(% 2)'(4 0!24
/& 4(% (!.$,%"!2
NOTE
The electrical parts work only when the ignition switch is
in position “
n
”.
7) ENGINE STOP SWITCH (
n
-
m
)
a
WARNING
Do not operate the engine stop switch “
n
-
m
” in running
conditions.
This is a safety or emergency switch.
With the switch in position “
n
”, it is possible to start the en-
gine; the engine can be stopped by moving the switch to posi-
tion “
m
”.
a
CAUTION
With stopped engine and ignition switch in position “
n
”,
the battery may discharge.
When the vehicle has come to rest, after stopping the en-
gine, move the ignition switch to position “
m
”.
8) START PUSH BUTTON (
r
)
When the start push button “
r
” is pressed, the starter makes
the engine run. For the starting, see p. 43 (STARTING).
Ing-01.fm Page 25 Friday, December 17, 1999 11:14 AM
