APRILIA Mana GT ABS 2012, Руководство пользователя

Страница: 85 / 148

CAUTION
HOT OIL IS MORE FLUID AND WILL DRAIN OUT MORE EASILY AND COM-
PLETELY; IDEAL TEMPERATURE IS REACHED AFTER THE ENGINE HAS RUN
FOR ABOUT TWENTY MINUTES.
OIL BECOMES VERY HOT WHEN THE ENGINE IS HOT; BE CAREFUL NOT TO
GET BURNED WHEN CARRYING OUT THE OPERATIONS DESCRIBED BELOW.
04_06
04_07
•
Use a cloth to wipe off any mud deposit on the area next to the filler plug (1).
•
Place a container with + 4000 cm³ (244 cu.in) capacity under the drainage
plug (2).
•
Unscrew and remove the drainage plug (2).
•
Unscrew and remove the filler plug (1).
•
Drain the oil into the container; allow several minutes for oil to drain out com-
pletely.
•
Replace the sealing washer of the drainage plug and the O-ring of the cap
(2).
•
Screw and tighten the drainage plug (2) paying attention that the O-ring is
adequately fitted so there are no oil leaks from the tank to the sump.
CAUTION
IF THE O-RING IS NOT CORRECTLY FITTED, THIS RESULTS IN LACK OF SEAL-
ING AND CAN CAUSE OIL LEVEL TO INCREASE IN THE SUMP IN STATIC
CONDITIONS.
Locking torques (N*m)
Engine oil drainage plug - M16x1.5 (1)
21 - 29 Nm (15.49 - 21.39 lbf ft)
85
4 Maintenance