manualshive.com logo in svg

APRILIA Mana GT ABS 2012, Руководство пользователя

Поделиться
Скачать
APRILIA Mana GT ABS 2012 Скачать руководство пользователя страница 19

Instrument panel (02_04)

key:

1.

Speedometer

2.

Multifunctional digital display

3.

Warning lights

The instrument panel has an immobilizer system which prevents start-up in case the
system does not identify a key which has been stored before.

The vehicle is supplied with two keys already programmed. The instrument panel ac-
cepts a maximum of four keys at the same time: contact an Official 

Aprilia

 Dealer to

enable these keys or to disable a key that has been lost. When the vehicle is delivered
and approximately ten seconds after the key is set to ON, the instrument panel re-
quests a personal five-digit code to be entered. This request is no longer displayed
once the personal code is entered. For code entering procedure, see the CODE
MODIFICATION section

It is important to remember the personal code because:

•

the vehicle can be started if the immobilizer system is faulty

•

the instrument panel need not be replaced should the ignition switch
be changed

•

new keys can be programmed

19

2 Vehicle

Содержание Mana GT ABS 2012





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды