APRILIA Mana GT ABS 2012 Скачать руководство пользователя

Страница: 79 / 148

MAKE SURE THAT THE GROUND ON WHICH THE MOTORCYCLE IS PARKED
IS STABLE, EVEN AND FREE OF OBSTACLES.

•

With the left shoe heel, lower and extend the side stand completely.

CAUTION

IF YOU CAN NOT REACH THE GROUND WITH BOTH FEET WHEN SEATED,
PLACE YOUR RIGHT FOOT ON THE GROUND (IF YOU LOSE BALANCE, THE
SIDE STAND WILL PREVENT A FALL ON THE LEFT SIDE) AND BE READY TO
PUT YOUR LEFT FOOT ON THE GROUND.

•

Place both feet on the ground and keep the vehicle balanced in the upright
position.

•

Give instructions as necessary to help the passenger dismount the vehicle.

RISK OF FALLING AND OVERTURNING.

MAKE SURE THE PASSENGER HAS GOT OFF THE VEHICLE.

DO NOT REST YOUR WEIGHT ON THE SIDE STAND.

•

Lean the vehicle until the stand touches the ground.

•

Grasp the handlebar firmly and get off the vehicle.

•

Turn the handlebar fully leftwards.

•

Fold up the passenger footrests.

•

Pull the parking lever.

3 Use

Содержание Mana GT ABS 2012





















































































































































Результаты поиска

Содержание Mana GT ABS 2012

Отзывы:

Похожие инструкции для Mana GT ABS 2012

Бренды по названию

Популярные бренды

APRILIA Mana GT ABS 2012, Руководство пользователя

Результаты поиска

Содержание Mana GT ABS 2012

Отзывы:

Похожие инструкции для Mana GT ABS 2012

Бренды по названию

Популярные бренды