ADDINg HVAC AND HUMIDITy CONTROL EqUIpMENT
The HVAC page allows the user to set-up,
up to 24 HVAC units . These units can be
renamed for ease of identification . The
Name field can be up to 12 characters and
any combination of letters, numbers, spaces,
and symbols .
The Controls Heat/Humid field is used to
select if the equipment controls Heating, in
the case of a thermostat or Humidification in
the case of a humidistat .
The Controls Cool/Dhmd field is used to
select if the equipment controls Cooling, in
the case of a thermostat or Dehumidification
in the case of a humidistat .
The Fan field is used to select if the
thermostat controls the fan .
CONFIgURINg THERMOSTATS AND HUMIDISTATS
The Thermostat/Humidistats page is used to
configure the thermostats and humidistats
on the network . The Address Field is used
to identify which thermostat or humidistat
on the network is being displayed for set-up .
The Model field will indicate what model
thermostat is connected at that network
address . The Prior and Next buttons can
be used to navigate to the previous or next
network address .
11
