CHANgE yOUR Ip ADDRESS ON yOUR SySTEM CONTROLLER TO MATCH yOUR
NETWORk SETTINgS
The following section describes how
to change the IP address of the system
controller . Perform these steps:
• If you have followed the previous steps to
change your computer’s IP address so that
it starts with 192 .168 .0, and you are now
ready to set the correct IP address for the
System Controller, or
• If your computer’s IP address does start
with 192 .168 .0, but you want the IP
address of the System Controller to be
something other than 192 .168 .0 .100 .
1 . Start a web browser on your computer .
2 . Place the cursor in the address field and
type http://192 .168 .0 .100 and then press
Enter to bring up the page shown at right .
3 . Select the Network tab at the top of the
page . You will see the page at right:
4 . Type in the desired IP address and Subnet
mask to match your network .
5 . Record the IP address that you entered
below for future reference .
____ .____ .____ .____
7
