2 . Type
cmd
and then click OK: this will
bring up the command prompt similar to
that shown at right:
3 . Type
ipconfig
and press Enter: several lines including the IP Address of the Local Area Connection will be displayed, as shown above .
FOR WINDOWS Xp
1a . Start the Control Panel by clicking Start, then Settings and Control Panel . In the Control Panel, locate and double click Network Connections
to bring up Network Connections dialog, shown below . Select Local Area connection and then go to File and select Properties to bring up the
Local Area Connection Properties dialog box on the right, below .
CHANgINg yOUR Ip ADDRESS
If your computer’s IP address begins with 192 .168 .0 then you can skip this step .
If you computer’s IP address does not begin with 192 .168 .0 then you need to temporarily change your computer to connect to the System
Controller and change its settings to match your network .
In the following procedure we will change your computer’s IP address so that you can communicate with the System Controller . Once this step is
completed, you can then connect to the System Controller to change it’s IP address to match your network .
5
