SENSORS
The System Controller can be used to
monitor the status of up to 4 humidity
or temperature sensors per thermostat .
Sensors are implemented on the Model 8800
thermostat by installing the Aprilaire Model
8081 TT or Model 8082 TrH Support Module .
Sensors are implemented on the Model 8870
thermostat by installing the Aprilaire Model
8061 TT or Model 8062 TrH Support Module .
The first sensor is for Support Module
address 1, sensor 1 . The second sensor
is for Support Module address 1, sensor
2 . The third sensor is for Support Module
address 2, sensor 1, and the fourth sensor
is for Support Module address 2, sensor 2 .
If a sensor is installed at these locations the
sensor type will be displayed . If no sensor is
installed, a no sensor message will be
displayed . If a sensor is attached to the
thermostat, but does not appear on this
page the support module dip switch settings
should be verified .
Each sensor can be named so it can be more
easily identified on other System Controller
pages . The Sensor Name field can be up
to 12 characters and any combination of
letters, numbers, spaces, and symbols .
13
