Apprion IONizer 4200 Series, Руководство по установке оборудования

Страница: 26 / 38

Chapter 5
– Cabling the IONizer
Page 18
Apprion Proprietary & Confidential
for more information. There are also a number of different iKITs available for different applications. Talk
to your Apprion Sales Representative.
Using 24 VDC from an iKIT
The IONizer can be powered by 24 VDC. The 24 VDC wires are hard wired inside the IONizer and
protrude from the same conduit opening as the WAN and LAN cables. Connections are made in the
same area as the Ethernet cables to the IONizer (inside the conduit housing). These wires must be
connected to 24 VDC cables coming from an iKIT or 24 VDC source. Refer to the appropriate iKIT
installation Guide for instructions on how to configure 24VDC inside the iKIT.
The use of wire nuts is suggested. Termination of the 24 VDC wires can be done based on common
industry practices per local and national electrical codes.
IONizer 4220
The IONizer 4220 (WiHART) models are wired the same way as the 4200 models. The only exception if
that there is only one Ethernet (WAN) cable on all embedded WiHART models.